Material Kits are a fast, easy and economical option if none of the standard sauna models are suitable for your space. The structure and equipment of Material Kits are similar to the some of the models in the Harvia Variant Line provided that the maximum floor area of the sauna is circa 64.6-75.3 sqft (6-7 m²) and the height does not exceed 7.5ft (2.3m).

A selection of doors and windows can be ordered for Material Kits from the standard range. 45-degree corners are available, and the roof can be slanted for saunas built in low attic spaces.

The Do-It-Yourself Material Kit Includes:

• Tongue and Grooved Wood for the Walls (Vertical Installation) and Ceiling
• Materials for a 20" Upper and 16" Lower Bench
• Tin Foil Vapour Barrier - 250 sq.ft. Roll
• Harvia KIP Sauna Heater with Built-In Controls and 8hr Programmable Timer
• Full Tempered Pre-Hung Glass Door (27' 1/4" x 74' 1/4" w/ Frame)
• Sauna Light - Your Choice Wall or Ceiling Mount
• Wooden Grill Vent
• Wooden Sliding Vent
• Sauna Seal

Extra Materials You Will Need to Purchase:

• Nails
• 2"x4" or 2"x6" boards for framing the walls
• 1"x2" boards for strapping the walls
• 2"x4" boards for the bench frame
• Fiberglass Insulation (R20)
• #10 wire for 6kW heater or #8 wire for 8kW heater
• Wire for lighting
• Flooring Materials